Home
Shop
Wishlist0

Linear PD300EMZ5-1 GoControl Z-Wave Plug-In Lamp Dimmer

Signal (Frequency): 908.42 MHz
Maximum Load Incandescent: 300W maximum, 120V AC
Range: Up to 100′ line of sight between theWireless controller and/or the closest Z-Wave

$70.37

Buy Now
SKU:PD300EMZ5-1

Product Overview

The PD300EMZ5-1 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles – one controlled, and one pass-through (powered at all times).

This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

Auto-SenseUnique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status. With AutoSense, one can simply switch the connected lamp’s manual switch off, then on, and AutoSense will instruct the PD300EMZ5-1 to turn the lamp on.

Main Features

  • Signal (Frequency): 908.42 MHz
  • Maximum Load Incandescent: 300W maximum, 120V AC
  • Range: Up to 100′ line of sight between theWireless controller and/or the closest Z-Wave device
  • Network wide inclusion
  • One controlled and one pass-through outlet
  • Security beaming
  • Power Requirements: 120 VAC, 60 Hz
Specifications
Part Number PD300EMZ5-1 Product Line Z-Wave Product Model PD300EMZ5-1 Product Name PD300EMZ5-1: Z-Wave Plug-in Dimmer Module Product Type Plug-in Appliance Module, Smart Plug
Technical Information
Plug Detail 1 x AC Power Plug Type AC Power Receptacle Detail 2 x AC Power Receptacle Type AC Power
Power Description
Voltage Rating 120V AC
Back to Top
Product has been added to your cart