Standard Power Systems provide FlexPower power modules in a secure UL listed solution. Standard Power features include:
- Built in Fire Alarm disconnect unlocks doors on a fire alarm
- Low battery cutoff protects batteries from deep discharge
- Dedicated fast charger prolongs battery life
- Enhanced surge immunity for input/output protection
- Locksafe™ optimized voltages provide longterm lock protection
- OutSmart™ Visual LED notification (12V/Green, 24V/Blue)
- Network ready with optional Netlink™ module
- Monitor power supply and battery in NetLink dashboard
- Remote test batteries
- Lifetime Warranty LifeSafety Power’s quality commitment
SYSTEM DETAILS
- FPO150/150 Dual Voltage Power 300W Total Output, 120 VAC Input, AC Fault and System Fault form C contacts may be triggered by low/no battery, short to earth ground, power supply failure, or blown fuse
- C8 8 Relay Lock Outputs 3A fused outputs, programmable for failsafe/failsecure, FAI, NC/NO input, voltage or dry output per zone. Dual buss voltage selection by zone, OutSmart dual color LEDs
- D8 8 Auxiliary Outputs 3A fused Outputs, dual buss voltage selection by zone, OutSmart dual color LEDs
- E2 Enclosure Size: 20.0H x 16.0W x 4.5D in (50.8 x 40.64 x 11.43 cm)
- System Weight 16.00 lbs (7.26kg)
-
ELECTRICAL RATINGSParameterRatingInput Voltage120 VAC, 50/60HzInput Power (max)340WOutput Power300WAuxiliary Outputs8 @ 3A FusedLock Outputs8 @ @ 3A FusedMaximum Charge CurrentFPO150: 2A, 80AH maximumLow Power Disconnectat 70% of battery voltageSystems BTU/Hr66 BTU/HrOperating Temperature32 to 122F (0 to +50C)Efficiency88% 120VAC 60Hz In, Full LoadAgency ApprovalsUL294, UL1076, UL2610, ULC S318, ULC S319, CSA C22.2 #107.1, FCC Part 15, Subpart B, CSFM IEC 62368-1:2014, EN 55032:2015, EN6100-3-2:2014, EN6100-3-3:2013, EN55024:2010+A1:2015, BIS IS13252(Part 1):2010, NOM-001-SCFI-1933, REACH 209, ROHS 3, RCM AS/NZS 4417.1, SAA AS/NZS 62368.1:2018
Downloads
Weight | 21 lbs |
---|