BEA´s IXIO-DT1 is the premier motion and presence sensor, combining the highest quality and the best value for the automatic sliding door industry. This dual technology product is a highly flexible and user-friendly solution for sliding doors, industrial doors, vehicle gate detection and off-door automation. The IXIO-DT1 can be adjusted into an ANSI compliant solution and has earned a comprehensive list of credentials and certifications, including FCC and IP54. The IXIO-DT1 ensures convenience, safety and energy efficiency for all BEA customers and end users.
This item: 10IXIODT1 BEA Sensor Packages
$502.52
$502.52
| DETECTION MODE: | Motion minimum detection speed: 2 in/s | Presence typical response time: < 200 ms (max: 500 ms) |
|---|---|---|
| TECHNOLOGY: | Microwave doppler radar Transmitter frequency: 24.150 GHz Transmitter radiated power: < 20 dBm EIRP Transmitter power density: < 5 mW/cm2 | Active infrared with background analysis Spot: 2” × 2” (typ) Number of spots: max. 24 per curtain Number of curtains: 2 |
| MOUNTING HEIGHT: | 6’6” – 11’6” local regulations may impact acceptable mounting height (pedestrian applications only) | |
| SENSOR TEMPERATURE RANGE: | -13 – 131 °F * 0 – 95% relative humidity, non-condensingLCD screen is operational from 14 – 131 °F. The sensor may still be programmed in colder temperatures, but with the remote control. | |
| OUTPUT RELAY 1RELAY 2 | Electromechanical relay (potential and polarity free) Max. contact current: 1 A Max. contact voltage: 30 VAC Adjustable hold time: 0.5 – 9 sSolid-state relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 VDC / 30 VAC | |
| TEST/MONITORING INPUT: | Sensitivity: Low: < 1 V High: > 10 V (max. 30 V)Response time on test request: typical < 5 ms | |
| SUPPLY VOLTAGE: | 12 – 24 VAC ±10% 12 – 30 VDC ±10%to be operated from SELV-compatible power supplies only | |
| POWER CONSUMPTION: | < 2.5 W | |
| NOISE: | < 70 dB | |
| DEGREE OF PROTECTION: | IP54 | |
| FCC CERTIFICATION: | FCC: G9B-100606 IC: 4680A-100606 | |
| COMPLIANCE: | ISO 13849 PL «c» CAT. 2 (under the condition that the door control system monitors the sensor at least once per door cycle) |