Product Highlights:
We have BD Loops direct burial loops in 12-foot to 52-foot lengths with 40-foot to 100-foot lead-ins at Titan Security Supply. These direct burial loops are used for installations under concrete driveways and other concrete layouts, under asphalt, under pavers and in gravel roads. Tie the loop directly to rebar before concrete is poured. Twisted jacketed lead-ins prevent “coil back” from normal twisted lead-in, preventing wasted time untangling lead-in wires. Unlike loops wrapped through PVC, The BD Loops direct burial loop does not have an air pocket. This means fewer repeat service calls due to phantom detections caused by ground vibration. These BD Loops are built with solid 16AWG. To install BD Loops direct burial loop over rebar, simply offset the loop from the rebar pattern and tie it down with the supplied cable ties. Each direct burial loop arrives with an installation kit that includes cable ties for installation on top of rebar, ground stakes for laying the loop in gravel and dirt roads, stickers for easy identification and easy-install instructions. Keep in mind that installing a loop under pavers with a concrete or slurry sub-base requires the use of BD Loops saw-cut loop from NorthShoreCommercialDoor.com.
Product Highlights:
- 12′ to 52′ lengths
- 40′ to 100′ lead-in wires
- Install under concrete, asphalt, pavers, gravel roads
- Built with 16 AWG
- Twisted-jacket lead-ins prevent “coil back”
