AL400ULM Altronix Power Supply

Overview
Specifications
Documents
Product Overview
Altronix M series access control power supply/chargers are specifically designed for use with access control systems and accessories. These units convert a 115VAC, 60Hz input into five (5) individually protected 12VDC or 24VDC outputs (see specifications). Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open [NO] or normally closed [NC] supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form œC dry output relay enables HVAC Shutdown, Elevator Recall or may be used to trigger auxiliary devices.
Main Features
Fire Alarm Panel or Access Control System trigger inputs. [NO] or [NC] supervised trigger input and polarity reversal trigger input (4mA draw from FACP).
Five (5) individual power-limited Class 2 outputs (auto-resettable).
Filtered and electronically regulated outputs.
Thermal and short circuit protection with auto reset
Overload protection
Output relay energizes when unit is triggered (form œC contact rated 1A @ 28VDC)
General Information
Name: Altronix AL400ULM Access Power Distribution Module with Power Supply Charger, PTC Class Outputs, 12/24VDC at 4A, BC300 Enclosure, Altronix Corporation, Altronix
Category: Altronix, Access Control, Batteries & Power Supplies, Power Products, Power Management, Power Distribution Modules, Power Distribution Modules
UPC Code: 782239930845
Country of Origin: United States. Country of origin is subject to