Electrical Ratings
Input Voltage
Universal Input, 100-240 VAC,50/60Hz
Managed Lock Outputs
8 @ 2.5A Class 2 Power Limited
Auxiliary Outputs
8 @ 2.5A Class 2 Power Limited
Maximum Charge Current
FPG100: 1.1A, 40AH maximum
Low Power Disconnect
at 70% of battery voltage
Operating Temperature
32 to 122F (0 to +50C)
Efficiency
81% 120VAC 60Hz In, Full Load
Agency Approvals
FCC Part 15, Subpart B IEC 62368-1:2014, EN 55032:2015, EN6100-3-2:2014, EN6100-3-3:2013, EN55024:2010+A1:2015, BIS IS13252(Part 1):2010, REACH 209, ROHS 3, RCM AS/NZS 4417.1, SAA AS/NZS 62368.1:2018, PSE J62368-1(2020), PSE J55032(H29)
|
Overview
Standard Power Systems provide FlexPower power modules in a secure UL listed solution. Standard Power features include:
- Built in Fire Alarm disconnect unlocks doors on a fire alarm
- Low battery cutoff protects batteries from deep discharge
- Dedicated fast charger prolongs battery life
- Enhanced surge immunity for input/output protection
- Locksafe optimized voltages provide long-term lock protection
- OutSmart Visual LED notification (12V/Green, 24V/Blue)
- Network ready with optional LifeSafety Power NetLink® module
- Monitor power supply and battery in NetLink dashboard
- Remote test batteries
- Lifetime Warranty LifeSafety Power's quality commitment
System Details
- 1 x FPG100 100W Total Output, Universal Input, AC Fault and System Fault form C contacts may be triggered by low/no battery, short to earth ground, power supply failure, or blown fuse
- 1 x D8P (8 Auxiliary Outputs) 2.5A Class 2 Power Limited Outputs, dual buss voltage selection by zone, OutSmart dual color LEDs
- 1 x M8P (8 Managed Lock Outputs) 2.5A Class 2 power limited outputs, programmable for failsafe/failsecure, remote power cycle, monitor voltage and current on each output, programmable limits, dual buss voltage selection by zone, cycle count by zone, bi-color output LEDs verify voltage setting
- 1 x NLC NetLink Module Provides scalable remote management of power supply and battery set, locks (with M8), auxiliary devices (with SD), remote battery testing, temperature monitoring, tamper switch monitoring, email/SNMP alerts on faults, compatible with MSM Enterprise
- E4 Enclosure Size: 24.0H x 20.0W x 6.5D in (60.96 x 50.80 x 16.51 cm)
- System Weight 25.95 lbs (11.77kg)
|
