Mercury Unified Power Systems combine FlexPower power modules alongside access control hardware in one compact and secure UL listed solution. Unified Power features include:

Built in Fire Alarm disconnect unlocks doors on a fire alarm
Low battery cutoff protects batteries from deep discharge
Dedicated fast charger prolongs battery life
Enhanced surge immunity for input/output protection
Locksafe optimized voltages provide long-term lock protection
OutSmart Visual LED notification (12V/Green, 24V/Blue)
Network ready with optional LifeSafety Power NetLink® module
- Monitor power supply and battery in NetLink dashboard
- Remote test batteries
Lifetime Warranty LifeSafety Power’s quality commitment

System Details

1 x FPO150 150W Total Output, 120 VAC Input, AC Fault and System Fault form C contacts may be triggered by low/no battery, short to earth ground, power supply failure, or blown fuse
2 x C8 (16 Relay Lock Outputs) 3A fused outputs, programmable for failsafe/failsecure, FAI, NC/NO input, voltage or dry output per zone. Dual buss voltage selection by zone, OutSmart dual color LEDs
1 x D8P (8 Auxiliary Outputs) 2.5A Class 2 Power Limited Outputs, dual buss voltage selection by zone, OutSmart dual color LEDs
E4M1 Enclosure Size: 24.0H x 20.0W x 6.5D in (60.96 x 50.80 x 16.51 cm)
- Enclosure E4M1
- Backplate E4M1
System Weight 32.05 lbs (14.54kg)

Electrical Ratings

Parameter

Rating

Input Voltage

120 VAC, 50/60Hz

Input Power (max)

170W

Output Power

150W

Relay Lock Outputs

16 @ 3A Fused

Auxiliary Outputs

8 @ 2.5A Class 2 Power Limited

Maximum Charge Current

FPO150: 2A, 80AH maximum

Low Power Disconnect

at 70% of battery voltage

Systems BTU/Hr

66 BTU/Hr

Operating Temperature

32 to 122F (0 to +50C)

Efficiency

88% 120VAC 60Hz In, Full Load

Agency Approvals

UL294, UL603, UL1076, ULC S318, ULC S319, CSA C22.2 #205, FCC Part 15, Subpart B, EN 55032:2015, EN6100-3-3:2013, BIS IS13252(Part 1):2010, REACH 209, ROHS 3

Weight	40 lbs

Main Menu

Cart (1)