BEA´s IXIO-DT1 is the premier motion and presence sensor, combining the highest quality and the best value for the automatic sliding door industry. This dual technology product is a highly flexible and user-friendly solution for sliding doors, industrial doors, vehicle gate detection and off-door automation. The IXIO-DT1 can be adjusted into an ANSI compliant solution and has earned a comprehensive list of credentials and certifications, including FCC and IP54. The IXIO-DT1 ensures convenience, safety and energy efficiency for all BEA customers and end users.
10IXIODT1 BEA Sensor Packages
Motion and Presence Sensor for Automatic Sliding Doors, Ten Microwave Activation Sensitivity Settings and Three Infrared Safety Immunity Settings, Ability to Distinguish Between Approaching and Departing Traffic
$502.52
Buy Now
This item: 10IXIODT1 BEA Sensor Packages
$502.52
$502.52
| DETECTION MODE: | Motion minimum detection speed: 2 in/s | Presence typical response time: < 200 ms (max: 500 ms) |
|---|---|---|
| TECHNOLOGY: | Microwave doppler radar Transmitter frequency: 24.150 GHz Transmitter radiated power: < 20 dBm EIRP Transmitter power density: < 5 mW/cm2 | Active infrared with background analysis Spot: 2” × 2” (typ) Number of spots: max. 24 per curtain Number of curtains: 2 |
| MOUNTING HEIGHT: | 6’6” – 11’6” local regulations may impact acceptable mounting height (pedestrian applications only) | |
| SENSOR TEMPERATURE RANGE: | -13 – 131 °F * 0 – 95% relative humidity, non-condensingLCD screen is operational from 14 – 131 °F. The sensor may still be programmed in colder temperatures, but with the remote control. | |
| OUTPUT RELAY 1RELAY 2 | Electromechanical relay (potential and polarity free) Max. contact current: 1 A Max. contact voltage: 30 VAC Adjustable hold time: 0.5 – 9 sSolid-state relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 VDC / 30 VAC | |
| TEST/MONITORING INPUT: | Sensitivity: Low: < 1 V High: > 10 V (max. 30 V)Response time on test request: typical < 5 ms | |
| SUPPLY VOLTAGE: | 12 – 24 VAC ±10% 12 – 30 VDC ±10%to be operated from SELV-compatible power supplies only | |
| POWER CONSUMPTION: | < 2.5 W | |
| NOISE: | < 70 dB | |
| DEGREE OF PROTECTION: | IP54 | |
| FCC CERTIFICATION: | FCC: G9B-100606 IC: 4680A-100606 | |
| COMPLIANCE: | ISO 13849 PL «c» CAT. 2 (under the condition that the door control system monitors the sensor at least once per door cycle) |