Paxton Unified Power Systems combine FlexPower power modules alongside access control hardware in one compact and secure UL listed solution. Unified Power features include:
- Built in Fire Alarm disconnect unlocks doors on a fire alarm
- Low battery cutoff protects batteries from deep discharge
- Dedicated fast charger prolongs battery life
- Enhanced surge immunity for input/output protection
- Locksafe™ optimized voltages provide longterm lock protection
- OutSmart™ Visual LED notification (12V/Green, 24V/Blue)
- Network ready with optional Netlink™ module
- Monitor power supply and battery in NetLink dashboard
- Remote test batteries
- Lifetime Warranty LifeSafety Power’s quality commitment
SYSTEM DETAILS
- FPO250 Single Voltage Power 250W Total Output, 120 VAC Input, AC Fault and System Fault form C contacts may be triggered by low/no battery, short to earth ground, power supply failure, or blown fuse
- 4 D8 32 Auxiliary Outputs 3A fused Outputs, dual buss voltage selection by zone, OutSmart dual color LEDs
- E8P Enclosure Size: 36.0H x 30.0W x 6.5D in (91.44 x 76.2 x 16.51 cm)
- Enclosure Backplate mounting for Paxton NET2 Controllers
- System Weight 62.15 lbs (28.19kg)
ELECTRICAL RATINGS
Parameter
Rating
Input Voltage
120 VAC, 50/60Hz
Input Power (max)
282W
Output Power
250W
Auxiliary Outputs
32 @ 3A Fused
Maximum Charge Current
FPO250: 2A, 80AH maximum
Low Power Disconnect
at 70% of battery voltage
Systems BTU/Hr
109 BTU/Hr
Operating Temperature
32 to 122F (0 to +50C)
Efficiency
87% 120VAC 60Hz In, Full Load
Agency Approvals
UL294, UL1076, UL2610, ULC S318, ULC S319, CSA C22.2 #107.1, FCC Part 15, Subpart B, CSFM IEC 62368-1:2014, EN 55032:2015, EN6100-3-2:2014, EN6100-3-3:2013, EN55024:2010+A1:2015, BIS IS13252(Part 1):2010, NOM-001-SCFI-1933, REACH 209, ROHS 3, RCM AS/NZS 4417.1, SAA AS/NZS 62368.1:2018
|
Downloads
| Weight | 89 lbs |
|---|
This item: FPO250-4D8E8P LifeSafety Power 12-16DR SV | 250W | E8P
$1,866.00
$1,866.00
