Standard Power Systems provide FlexPower power modules in a secure UL listed solution. Standard Power features include:

Built in Fire Alarm disconnect unlocks doors on a fire alarm
Low battery cutoff protects batteries from deep discharge
Dedicated fast charger prolongs battery life
Enhanced surge immunity for input/output protection
Locksafe™ optimized voltages provide longterm lock protection
OutSmart™ Visual LED notification (12V/Green, 24V/Blue)
Network ready with optional Netlink™ module
- Monitor power supply and battery in NetLink dashboard
- Remote test batteries
Lifetime Warranty LifeSafety Power’s quality commitment

SYSTEM DETAILS

FPO250/250 Dual Voltage Power 500W Total Output, 120 VAC Input, AC Fault and System Fault form C contacts may be triggered by low/no battery, short to earth ground, power supply failure, or blown fuse
2 C8 16 Relay Lock Outputs 3A fused outputs, programmable for failsafe/failsecure, FAI, NC/NO input, voltage or dry output per zone. Dual buss voltage selection by zone, OutSmart dual color LEDs
2 D8 16 Auxiliary Outputs 3A fused Outputs, dual buss voltage selection by zone, OutSmart dual color LEDs
E4 Enclosure Size: 24.0H x 20.0W x 6.5D in (60.96 x 50.8 x 16.51 cm)
System Weight 28.05 lbs (12.72kg)

ELECTRICAL RATINGS

Parameter

Rating

Input Voltage

120 VAC, 50/60Hz

Input Power (max)

564W

Output Power

500W

Auxiliary Outputs

16 @ 3A Fused

Lock Outputs

16 @ @ 3A Fused

Maximum Charge Current

FPO250: 2A, 80AH maximum

Low Power Disconnect

at 70% of battery voltage

Systems BTU/Hr

109 BTU/Hr

Operating Temperature

32 to 122F (0 to +50C)

Efficiency

87% 120VAC 60Hz In, Full Load

Agency Approvals

UL294, UL1076, UL2610, ULC S318, ULC S319, CSA C22.2 #107.1, FCC Part 15, Subpart B, CSFM IEC 62368-1:2014, EN 55032:2015, EN6100-3-2:2014, EN6100-3-3:2013, EN55024:2010+A1:2015, BIS IS13252(Part 1):2010, NOM-001-SCFI-1933, REACH 209, ROHS 3, RCM AS/NZS 4417.1, SAA AS/NZS 62368.1:2018

Downloads

FPO250.250-2C82D8E4 – Datasheet

Weight	39 lbs

Main Menu

Cart (3)