Magnetic AutoControl MicroDrive and FlowMotion Dual Control Panel (Includes Stickers) – PULT02
The Magnetic Single Lane Control Panel is used as a manual control for barriers, pedestrian gates, or other devices. This control panel is helpful in a porter’s lodge or reception area. The PULT02 is a 2-channel device that can control two independent barriers, two pedestrian gates, or a combination of a pedestrian and barrier gate.
Standardized and white stickers are included to place on a membrane button if used for another function. The white stickers can be written on with a waterproof pen.
This Product Is The Direct Replacement For Former Magnetic AutoControl Part PG02
Button Functions
Button S1
Functions as a multi-stage switch.
Button S2
Is the ON/OFF switch.
Button S3 and S4
These switch buttons do not have any memory functions.
LED P4 and P5
Situated by the S3 and S4 buttons, the LEDs switch with one input and do not need to have the same feedback as the S3 and S4 buttons.
Power Supply
Desk panels can only be operated with a 24V (VCC/GND) and polarity is important to observe. When using PULT 02, channels are galvanically separated, so you can use this control panel for two barriers or pedestrian gates or combine separate pedestrian and barrier gates together.
Technology
Channels are controlled by a separate microcontroller.