Peplink MAX HD2 IP67
2x LTEA – Americas & EMEA – AC Adapter & Antennas
MAX-HD2-M-LTEA-W-IP67 Peplink MAX HD2 IP672x LTEA – Americas & EMEA – AC Adapter & Antennas
$2,899.00
This item: MAX-HD2-M-LTEA-W-IP67 Peplink MAX HD2 IP672x LTEA - Americas & EMEA - AC Adapter & Antennas
$2,899.00
$2,899.00
Specs:
- Software: Pepwave MAX Firmware
- WAN:
- Support for PPPoE, Static IP, DHCP
- WAN Link Health Check
- Bandwidth Allowance Monitor
- IPv6 Support
- Support for Dynamic DNS services
- LAN:
- DHCP Server for LAN Clients
- Extended DHCP Option
- DHCP Reservation
- DNS Proxy for LAN Clients
- Load Balancing:
- Intelligent Failover
- Session Persistence
- Per-Service Load Distribution
- Multiple Algorithms
- Weighted
- Enforced
- Persistence
- Priority
- Overflow
- Least Used
- Lowest Latency
- Complete VPN Solution:
- PepVPN/SpeedFusion Bandwidth Bonding
- Site-to-Site VPN Bonding
- Bandwidth Aggregation
- Seamless Failover
- 256-bit AES Encryption
- Pre-shared Key Authentication
- Dynamic Routing
- PPTP VPN Server
- RADIUS, LDAP Authentication
- IPsec VPN (Network-to-Network)***
- PepVPN/SpeedFusion Bandwidth Bonding
- Networking:
- NAT and IP Forwarding
- Static Routes
- Port Forwarding
- Many to One, One to One NAT
- NAT Pool
- SIP ALG, H.323 ALG
- UPnP, NAT-PMP
- WINS Server
- Security:
- DoS Prevention
- Stateful Firewall
- Advanced QOS:
- Application Prioritzation
- Custom Application QoS
- Device Management:
- Web Administrative Interface
- Command Line Interface
- InControl Cloud Management
- Email Notification
- Active Client and Session Lists
- Bandwidth Usage Statistics
- Syslog Service
- SNMP v1, v2c and v3
- Dimensions: 10.2" x 5.7" x 1.6"
- Weight: 2.65 pounds
- WAN Ports / Internet Links: 2
- LAN Ports: 1 (GbE)
- Embedded Modems 2 with redundant SIM slots
- Downlink/Uplink Datarate: 300Mbps/50Mbps
- Router Throughput: 400Mbps
- SIM slots: Standard 2FF
- Cellular Antennas: NOT included. Required for use. Connectors are N/Female
- Power Input: 802.3at PoE+ or AC Input 100V-240V or DC 12V - 56V, 3A
- Power Supply: NOT included. Either a 802.3af/at PoE injector (recommended) or a 10-30VDC power source is required
- Power Consumption: 25W
- Operating Temperature: -40° - 149°F (-40° - 65°C)
- Humidity: 15 to 95%
- Support and Warranty: 1-year limited warranty
- Certifications:
- FCC, CE, RoHS
- RF Port Lighting Immunity: ITU-T K.20 (+/- 1.5 kV)
Downloads
| Weight | 9 lbs |
|---|